Ship Paint Construction Process
Time:
2024-03-11
Source:
Ship paint construction process mainly includes the following steps:
Preparation stage: First, clean and treat the surface of the hull to remove oil and dirt, and polish and remove rust to ensure that the surface is smooth and clean. At the same time, the hull is inspected and any potential defects and damage are repaired.
Primer construction: Primer is used to increase the adhesion of the coating and protect the surface of the hull. Primer is usually used. The composition and performance of the primer should be determined according to the hull material and the use environment. The thickness and uniformity of the coating should be paid attention to during the construction of the primer to prevent leakage and wave coating problems.
Intermediate coating construction: intermediate coating is used to increase the thickness of the coating and protect the surface of the hull, and intermediate paint is usually used. In the construction of the coating, attention should be paid to the uniformity and smoothness of the coating to avoid spots and irregularities.
Topcoat construction: topcoat is used to increase the gloss and beauty of the coating, usually using topcoat. The color and texture of the finish shall be determined according to the design requirements of the ship. Surface coating construction should pay attention to flatness and smoothness, to prevent brush marks and peeling problems.
Application of key technologies: In the process of ship paint spraying, there are several key technologies that need to be mastered, such as spraying technology and drying technology. Spray technology involves how to evenly spray the paint onto the surface of the hull, while drying technology involves the process of rapid drying and curing of the paint.
Other precautions: The temperature and humidity of the construction environment will affect the performance of the paint, so it must be controlled within an appropriate range. In addition, weather conditions should also be considered to avoid construction in bad weather.
Safety measures: throughout the construction process, strict safety measures must be taken, including but not limited to wearing appropriate personal protective equipment, and proper management of flammable materials.
To sum up, marine painting construction is a complex process, covering multiple steps and technical details, aiming to provide a strong, beautiful and durable marine painting.
Key words:
Hotline:+86 134 0599 8895
Contact Phone:+86 186 5077 7126
E-mail:fuzhoukeweisi@163.com
Fuzhou Kowis Ship Service Co., Ltd.
Address: Liandong U Valley Fuzhou Internet of Things Industrial Park, No. 12 Xingye West Road, Mawei District, Fuzhou City
Hotline:+86 13405998895
Contact Phone:+86 18650777126
E-mail:keweisiqygl@163.com
Fuzhou Kowis Ship Service Co., Ltd.
Address: Liandong U Valley, 12 Xingye West Road, Mawei District, Fuzhou City, Fujian Province. 801-1, Building 1, Fuzhou Internet of Things Industrial Park (Pilot Free Trade Zone)